Blair Supply Corp.
585-436-9624
 
Search this site only
 

Navigation Menu

Service Saddles - JCM Industries

Vendor Website Vendor website

arrow Return to Water Main Materials

JCM 404 Service Saddle with Double Stainless Steel Straps
Sizes 2" - 24" - Typical Specification

Service Saddles for pipe sizes 2" through 12" shall have a wrap-around design with a ductile iron body coated with a shop primer. The gasket shall be a broad pressure activated design, molded of virgin rubber and bonded into a cavity in the saddle body, which provides internal as well as external gasket retention. The straps, bolts, nuts and washers shall be 18-8 stainless steel with all welds passivated for resistance to corrosion. The combined strap width shall be 3-1/4 to provide a wide stance on the pipe.
JCM Industries Service Saddle

Service Saddles shall be JCM 404 or approved equal.

  • JCM 400 Series Service Saddles meet or exceed ANSI/AWWA C800 Standard for Underground Service Line Valve and Fittings.
  • Meets Uni-Bell Handbook of PVC Pipe/AWWA Manual M23 Design and Installation of PVP Pipe.
  • JCM 404 Series Service Saddles are ANSI/NSF Standard 61 Certified.

JCM 406 Coated Service Saddle with Double Stainless Steel Straps - Sizes 2" - 24" - Typical Specification

Service Saddles for pipe sizes 2" through 12" shall have a wraparound design with a ductile iron body, fusion plastic coated. The coating thickness shall be a minimum of 12 mils with a dielectric strength of over 12,000 volts. The gasket shall be a broad pressure activated design, molded of virgin rubber and bonded into a cavity in the saddle body which provides internal as well as external gasket retention.

The straps, bolts, nuts and washers shall be 18-8 stainless steel with all welds passivated for resistance to corrosion. The combined strap width shall be 3-1/4" to provide a wide stance on the pipe.

Service saddles for pipe sizes 14" through 24" shall have two (2) 2-3/4" wide stainless straps.

Service Saddles shall be JCM 406 or approved equal.

  • JCM 400 Series Service Saddles meet or exceed ANSI/AWWA C800 Standard for Underground Service Line Valve and Fittings.
  • Meets Uni-Bell Handbook of PVC Pipe/AWWA Manual M23 Design and Installation of PVP Pipe.
  • JCM 404 Series Service Saddles are ANSI/NSF Standard 61 Certified.

 

 

 




Water Main Materials
Sewer & Drainage Materials
Construction/Utility Equipment
Highway Products
Resource Center
Vendors

Industry Links
About Us
Contact Us
Sign up for e-News
Home

Blair Supply Corporation
785 Beahan Road - Rochester, NY 14624
585-436-9624

 

Water Main Materials Highway Products Sewer & Drainage Materials Construction/Utility Equipment Resource Center Vendors Industry Links About Us Contact Information Sign Up to Receive e-News Home