Water Main Materials
JCM Industries – Service Saddles
JCM 404 Service Saddle with Double Stainless Steel Straps
Sizes 2″ – 24″ – Typical Specification
Service Saddles for pipe sizes 2″ through 12″ shall have a wrap-around design with a ductile iron body coated with a shop primer. The gasket shall be a broad pressure activated design, molded of virgin rubber and bonded into a cavity in the saddle body, which provides internal as well as external gasket retention. The straps, bolts, nuts and washers shall be 18-8 stainless steel with all welds passivated for resistance to corrosion. The combined strap width shall be 3-1/4 to provide a wide stance on the pipe.
Service Saddles shall be JCM 404 or approved equal.
- JCM 400 Series Service Saddles meet or exceed ANSI/AWWA C800 Standard for Underground Service Line Valve and Fittings.
- Meets Uni-Bell Handbook of PVC Pipe/AWWA Manual M23 Design and Installation of PVP Pipe.
- JCM 404 Series Service Saddles are ANSI/NSF Standard 61 Certified.
JCM 406 Coated Service Saddle with Double Stainless Steel Straps – Sizes 2″ – 24″ – Typical Specification
Service Saddles for pipe sizes 2″ through 12″ shall have a wraparound design with a ductile iron body, fusion plastic coated. The coating thickness shall be a minimum of 12 mils with a dielectric strength of over 12,000 volts. The gasket shall be a broad pressure activated design, molded of virgin rubber and bonded into a cavity in the saddle body which provides internal as well as external gasket retention.
The straps, bolts, nuts and washers shall be 18-8 stainless steel with all welds passivated for resistance to corrosion. The combined strap width shall be 3-1/4″ to provide a wide stance on the pipe.
Service saddles for pipe sizes 14″ through 24″ shall have two (2) 2-3/4″ wide stainless straps.
Service Saddles shall be JCM 406 or approved equal.
- JCM 400 Series Service Saddles meet or exceed ANSI/AWWA C800 Standard for Underground Service Line Valve and Fittings.
- Meets Uni-Bell Handbook of PVC Pipe/AWWA Manual M23 Design and Installation of PVP Pipe.
- JCM 404 Series Service Saddles are ANSI/NSF Standard 61 Certified.
